Pistachio Green

Acclimatise the flooring by placing packs flat in the room where they are to be fitted for 48 hours prior to fitting with room temperature set between 18℃ to 27℃. This temperature should be maintained throughout fitting and for 72 hours after while the adhesive cures, meaning that sudden and/or big changes in temperature, even within the parameters, must be avoided e.g. take measures to prevent drops in overnight temperatures and shade the floor from sunlight. The subfloor (plywood/ screed) should be completely flat, smooth, clean and dry (moisture levels must be within acceptable parameters). Work out the laying plan in advance and lay the tiles into the adhesive according to instructions following the directional arrows and roll the surface to ensure full contact with the adhesive. At the edge of the room, cut the tiles using a sharp knife. A trained fitter will ensure best results. Always follow the full fitting & care guidance (links below).

Additional advice for this collection - Colours in this collection are best combined to create a chequerboard or other multi-coloured floor. Single colour floors are more challenging to fit and may show tonal variation in some lighting conditions; use an off-set (brick) pattern, and/or consider using design feature strips between the tiles to help with fitting and appearance.

Universal LVT Adhesive 1 Litre
£15.60

Universal LVT Adhesive 2.5 Litre
£24.00

Universal LVT Adhesive 5 Litre
£40.80

FloorSpa Cleaning Pack
£39.99

Floor Roller
£27.95

Choosing a laying pattern

Choosing your laying pattern is an important part of achieving the very best possible appearance for your floor. Laying pattern guide

Need a fitting service?

Simply fill out our Find a Fitter form and we’ll put you in contact with your local retailer or fitter. Find a Fitter form